Loading...

Led sensors



SWITCH-PIR

These VOLTRON® LED high-quality built-in sensors are used for dressings. Motion detector with automatically off after switch-off delay (40sec). SWITCH-PIR : connectable load = max. 96W (advice <85W) - IP20 - Ø = 17mm (hole = 14mm) - color = white - operation up to >180.000 connections - detection area = 2m all around (angle 120°) - cable lengths: 2m (sensor/controller) + 25cm (controller/power supply and controller/LED). Always 5 years warranty. In combination with VOLTRON® LED strips or LED panels/downlighters


Wattage
24V:<96W
IPwaarde
20
Voltage
24V
Lengte
10CM
Hoogte
1CM
Breedte
1CM
Diameter
17MM
Klopgat
14MM
garantie
5

All product specifications for : SWITCH-PIR


Productnumber
SWITCH-PIR
Barcode
LH-928
IP value
20
Voltage
24V
Wattage
24V:<96W
Length
10CM
Width
1CM
Height
1CM
Diameter
17MM
Punch hole
14MM
Finish color
White
Cable length
200CM
Constant voltage
Yes
Packed per
1
Full package
50

Specification text with product code

Type : Led sensors / productnumber : SWITCH-PIR
LED built-in sensor for use in dressings or cupboards. Detection by means of PIR sensor. Maximum connected load 24V = 96W. White finish color. 2M cord between sensor and controller. Automatic switch-off delay of 40sec. Detection eye = 17mm and a clock hole of 14mm. Detection field max 2M at 120 °. Service life of switches> 180,000. 5 years warranty. Merk = Voltron®, producttype : Led sensors, bestelcode=SWITCH-PIR


Specification text without product code

LED built-in sensor for use in dressings or cupboards. Detection by means of PIR sensor. Maximum connected load 24V = 96W. White finish color. 2M cord between sensor and controller. Automatic switch-off delay of 40sec. Detection eye = 17mm and a clock hole of 14mm. Detection field max 2M at 120 °. Service life of switches> 180,000. 5 years warranty.
Cable length between sensor and controller is: 2 meters
Cable length between the controller and a power supply connection: 25 cm
Cable length between the controller and the LED connection: 25 cm
Min number of circuits that these sensors can handle = +180,000
The SWITCH CONSTRUCTION and SWITCH -INBOUW is the perfect solution for all possible applications for cabinets, drawers, etc ... by using 1 switch per opening door, this can be perfectly combined with LED strips, aluminum bars 50 cm or the LED panels.
The SWITCH-PIR is the ideal solution for a dressing, the customer comes in and the eye detects the presence and the light comes on. After the eye can no longer detect a detection for 40 seconds, the light will automatically go out.
A point of attention, the controllers may be loaded with MAX 96W, it is recommended to use the 100Watt MeanWell power supply.
It is advisable to remain under 90 Watts to keep the controller under load.

 

Voltron Lighting Group hoofdkantoor Europa

Adres :
Essenestraat 16
Industriezone 2
B-1740 Ternat
België

Email us

Voltron Lighting Group
headquarters Asia

Address :
6 Tung Tau Tsuen, Ping Ha Road
Yuen Long
NT
Hong Kong

Email us

Voltron Lighting Group Shenzhen

Address :
Qiaotou,
Bao`an, Shenzhen
Guangdong Province
China